Creating a bootable pendrive using CMD

HOW TO MAKE A BOOTABLE PENDRIVE USING CMD

STEP 1: CONNECT THE PENDRIVE.
STEP 2: OPEN CMD.
STEP 3: TYPE “disk part”
STEP 4: PRESS ENTER
STEP 5: A WINDOW WITH THE NAME DISKPART.exe WILL APPEAR
STEP 6: THEN TYPE “list disk” IN THE DISKPART.exe WINDOW (YOU CAN CLOSE THE CMD WINDOW)
STEP 7: PRESS ENTER.
STEP 8: NOW WE CAN FIND THE DISKS CONNECTED TO THE PC. WE MUST SELECT THE DISK WHICH WE WANT TO MAKE AS A BOOTABLE PENDRIVE.
STEP 9: TYPE “select disk 1” AND PRESS ENTER.
STEP 10: WE FIND “Disk 1 is now selected disk.”
STEP 11: TYPE “clean” AND PRESS ENTER (to clean the pendrive)
STEP 12: WE FIND “Disk part succeeded in cleaning the disk.”
STEP 13: TYPE ”create partition primary” AND PRESS ENTER
STEP 14: WE FIND “Disk part succeeded in creating the specific partition.”
STEP 15: TYPE “select partition 1” AND PRESS ENTER
STEP 16: WE FIND “Partition 1 is now the selected partition.”
STEP 17: TYPE “active” AND PRESS ENTER
STEP 18: WE FIND “Disk part marked the current partition as active”
STEP 19: TYPE “format fs=ntfs quick” (to format the pendrive) (quick-fast format) AND PRESS ENTER.
STEP 20: WE FIND “0 percent completed”
WAIT TILL THE “0 percent completed” TO THE “100 percent completed” SINCE IT MAY TAKE SOME TIME.
STEP 21: WE FIND “Disk part successfully formatted the volume”
STEP 22: TYPE “exit” (to exit the window) AND PRESS ENTER
STEP 23: THE WINDOW WILL CLOSE
STEP 24: ONCE CHECK THE PENDRIVE WILL BE EMPTY
STEP 25: IN “CD DRIVE” KEEP ANY WINDOWS CD WHICH YOU WANT TO MAKE THE PENDRIVE AS A BOOTABLE ONE.
STEP 26: NOW COPY ALL THE FILES IN THE OPERATING SYSTEM CD AND PASTE ALL THE FILES IN THE PEN DRIVE.
STEP 27: THIS PROCESS MAY TAKE SOME TIME.
STEP 28: AFTER COPYING ALL THE FILES IN THE PEN DRIVE THE PENDRIVE BECOMES AS THE BOOTABLE PENDRIVE.
STEP 29: NOW RIGHT CLICK ON THE PENDRIVE AND SELECT EJECT
STEP 30: AND REMOVE THE PENDRIVE FROM THE PC AND RE-INSERT THE PENDRIVE
STEP 31: NOW THE PENDRIVE ICON WILL LOOK SAME AS THE O.S CD